Their new pincer placard has separator for the pouches makes it so 6 Glock sized mags fit. I’m waiting for this to be released but currently run 6 Glock pmag27s in my pincer. They hold tight but still want the new pincer once it comes out.
I’ve been waiting for the new pincer placard that’s takes both 5.56 mags and 7.62 mags. In all the waiting I went with defense mechanism placard system. I got the 7.62 placard and added the esstac kydex inserts in it and it runs all my mags. AR,AK, 308, and if I wanted to, it can hold loosely some pcc mags. I’m sure agilite will have a good amount of stuff out of stock with everything going on over there.
I’ve had the same issue, however, gunvaultusa on eBay has had a few in stock from time to time. I use the hrt maximus placard on my k19 and I was curious to see if it would work on my kzero and it did. There was very little hangover and will give you plenty of storage options. For better functionality, upgrade to the warfighter cummerbund with the quick detachment system to increase velcro life.
If you can’t find the ones with the split bar you can use a dremel with a cutoff wheel and make the split. That’s how I made it work.
Oddly the k19 worked fine with qasm so evidently they scaled things down on the Kzero
Absolutely, other brands will fit. I own a LOT of different placards, among them the Agilite pincer, and Ive gotta say I dont even like it that much.
If youre adamant about the pincer/admin pouch combo to carry extra stuff on your placard, consider the ferro dope placard or Spiritus Mk 3/4 placards.
I run a Spiritus Mk 5 on my main carrier, I would recommend that or the Shaw concepts Arc V3 placard for a similar product.
“Secret” tip at last, look into Carcajou tactical. Theyre a canadian company and make some killer products. Under their chest rig section you can find a few placards, I really like their eight pack rig for a lightweight design to carry a ton of mags.
Ive got the pincer/ admin combo mounted on a spiritus thing 2 chestrig platform. It works for me in that way as a relatively lightweight chest rig, but like I said, not huge on it for the plate carrier.
I wear it with level 4 plates and i am under the sun with my ak and mags and i do feel the stiffness coming from plates. Maybe this can help: https://protec.org.ua/product/podushky-klimatychni/ or something similar.
Now on shoulders, is quite well padded so i dont feel problems there. Which part is unconfortable for you , hombre?
Hey, just a heads up, we restocking Pincer Placard in Multicam next week
Will you guys ever do an m81 woodland k0 again? I love my ranger green one but I wouldn't mind it for my personal use woodland setup
MAYbe.. đź‘€
You better not be playing with my nuts. My wallet is ready
Today is the day!
I'm waiting!
Well congrats to Daniel! But I'd still quite like one :/
[https://agilitegear.com/collections/m81-woodland-gear](https://agilitegear.com/collections/m81-woodland-gear)
Not available in the EU?
No, sorry
Ebay it is
What about ranger green?
We have in it stock and on sale at the moment, very low amount left though
Will you be selling the inserts for the 9mm mags in the pincer separately? Or would you have to buy the updated pincer for that
Any chance there will be a PCC triple or quad placard in the future. I'd like to have one for my MPX.
Their new pincer placard has separator for the pouches makes it so 6 Glock sized mags fit. I’m waiting for this to be released but currently run 6 Glock pmag27s in my pincer. They hold tight but still want the new pincer once it comes out.
I’ve been waiting for the new pincer placard that’s takes both 5.56 mags and 7.62 mags. In all the waiting I went with defense mechanism placard system. I got the 7.62 placard and added the esstac kydex inserts in it and it runs all my mags. AR,AK, 308, and if I wanted to, it can hold loosely some pcc mags. I’m sure agilite will have a good amount of stuff out of stock with everything going on over there.
Use a WTF chest rig like this one: https://www.wtfidea.com/accessory-panel-13-insert-compatible/ And then just swap the inserts out as needed.
Esstac
I got a WTF chest rig that I’ve turned into a placard on mine. With their inserts, I can swap between 7.62 mags, 5.56 mags or pcc mags
I use an HRT Modulus on my K-Zero and it works great.
HRT placards work.
I’ve had the same issue, however, gunvaultusa on eBay has had a few in stock from time to time. I use the hrt maximus placard on my k19 and I was curious to see if it would work on my kzero and it did. There was very little hangover and will give you plenty of storage options. For better functionality, upgrade to the warfighter cummerbund with the quick detachment system to increase velcro life.
You can fix the hangover by swapping the qasm clips for g hooks. That’s what I did for my Maximus.
If you can’t find the ones with the split bar you can use a dremel with a cutoff wheel and make the split. That’s how I made it work. Oddly the k19 worked fine with qasm so evidently they scaled things down on the Kzero
I use Maximus HRT placard
Spiritus gang
Absolutely, other brands will fit. I own a LOT of different placards, among them the Agilite pincer, and Ive gotta say I dont even like it that much. If youre adamant about the pincer/admin pouch combo to carry extra stuff on your placard, consider the ferro dope placard or Spiritus Mk 3/4 placards. I run a Spiritus Mk 5 on my main carrier, I would recommend that or the Shaw concepts Arc V3 placard for a similar product. “Secret” tip at last, look into Carcajou tactical. Theyre a canadian company and make some killer products. Under their chest rig section you can find a few placards, I really like their eight pack rig for a lightweight design to carry a ton of mags.
I got Admin pouch but idek if i want to use it to be honest. Thanks for the suggestions man
Ive got the pincer/ admin combo mounted on a spiritus thing 2 chestrig platform. It works for me in that way as a relatively lightweight chest rig, but like I said, not huge on it for the plate carrier.
HRT Maximus placard retrofitted with Haley strategic triple mag insert to replace the elastic insert.
Just made purchased it a few minutes ago 🙌🏻
Anyone suffering from comfort issues with K-Zero, I can’t seem to make it comfortable
I wear it with level 4 plates and i am under the sun with my ak and mags and i do feel the stiffness coming from plates. Maybe this can help: https://protec.org.ua/product/podushky-klimatychni/ or something similar. Now on shoulders, is quite well padded so i dont feel problems there. Which part is unconfortable for you , hombre?