These look like custom top things for vapes no clue what they're called but there was a bunch of tanks that you could use custom mouthpieces on and some looked like this
One weird feature of those is that they are not barbed the way a fitting would be. It’s reversed - normally, for compression fittings, the steps would work to retain the hose, these are tapered away and the steps don’t serve the purpose of holding on to something.
Almost like this was AI generated and it used something that looked like a compression fitting. That, or they were custom made for looks and wouldn’t actually be useful for anything.
just a note on the colour, if you find a shape you like but it's just steel, Red Dykem will produce a similar effect on bright steel, you'll just need to put a varnish over it to keep it from rubbing off.
Those are cheap air hose fittings from Harbor Freight. They're sold in an air compressor "starter kit" with a blue rubber hose and a couple other things for like 15 bucks
[Anodised](https://www.phos.co.uk/finishes/anodising#:~:text=Anodising%20is%20an%20electrochemical%20process,the%20thickness%20of%20the%20metal.). Not ionised.
They could be motorcycle bar end protectors or swing arm spools
That seems pretty close!
Ding
Too small to be either one of those.
look up a “red anodized 4an hose fitting” and you’ll find something similar
you're going to change all of them if you want to make them match
These look strikingly similar, but I can't find the particular one shown in the photo.
change all of them instead of changing one
They kind of look like pc water coolant loop fittings
That's in the same realm as the red anodized hose fittings I've been seeing but they only seem similar.
Haha my first thought
Red anodized push lock hose fittings available from automotive performance parts suppliers
These look strikingly similar, but I can't find the particular one shown in the photo.
They kind of remind me of a pipe bowl and cover for smoking dope.
I think you're on to something ;)
are those there to smoke weed?
Points for creativity
Some kind of valve, or perhaps nutserts?
Definitely seems like industrial use. Just not sure from where.
Try looking up things related to "bulk head fittings"
Arent these usually larger though? Bulkheads Ive seen usually made from PVC, this seems more metallic.
They come in different sizes. Bulk head is just the style of mount
Nipples
Looks kind of like one side of a “quick connect coupling”
These look like custom top things for vapes no clue what they're called but there was a bunch of tanks that you could use custom mouthpieces on and some looked like this
Drip tips 510 for the narrower ones and 810 for the wider.
Yeah this
Coupler
pretty sure they're bong fittings
One weird feature of those is that they are not barbed the way a fitting would be. It’s reversed - normally, for compression fittings, the steps would work to retain the hose, these are tapered away and the steps don’t serve the purpose of holding on to something. Almost like this was AI generated and it used something that looked like a compression fitting. That, or they were custom made for looks and wouldn’t actually be useful for anything.
Looks like a quick disconnect fitting for air lines maybe? Grainger or McMaster have similarly shaped things.
Hydraulic fittings are pretty similar and they come in a few different colors.
just a note on the colour, if you find a shape you like but it's just steel, Red Dykem will produce a similar effect on bright steel, you'll just need to put a varnish over it to keep it from rubbing off.
Those are cheap air hose fittings from Harbor Freight. They're sold in an air compressor "starter kit" with a blue rubber hose and a couple other things for like 15 bucks
Hose barb
These look like the PCB Holders off my 3rd hand plate
Before I saw what sub this was, I thought this was a weird vacuum cleaner.
Whistlin' Bungholes Spleen Splitters Whisker Biscuits Honkey Lighters Hoosker Doos Hoosker Don’ts Cherry Bombs Nipsy Daisers (with or without the scooter stick) Whistlin' Kitty Chasers
Possibly custom? Look cnc machined and ionised if it helps.
[Anodised](https://www.phos.co.uk/finishes/anodising#:~:text=Anodising%20is%20an%20electrochemical%20process,the%20thickness%20of%20the%20metal.). Not ionised.
Now hold on, I don't see *you* waving a Geiger counter over them, they could be all kinds of ionized. ;)
Lol
If anything them being ionized would make them MORE cyberpunk.
You don't have to be so negative. Perhaps they were charged for ionised ones before. ;)
Yeah that one ha
Could be, I have seen lots of other masks use these though.
Could get something similar enough, paint and polish it. Look up hose fittings on like Home Depot or some similar hardware website.
True, I may need to improvise if this is the case