Your instinct to use the SDS drill with a chisel bit is pretty much spot on, I think. You can get special bits for removing tiles that have a bend in the shank, which will reduce the risk of going through the chipboard behind.
***EDIT:*** *This sort of thing: https://www.screwfix.com/p/armeg-sds-plus-shank-tile-removing-chisel-80mm-x-180mm/89391. Shop around though as you might be able to get cheaper elsewhere.*
SDS drill, or I've found if they aren't really stuck on then a old scraper can be really good as it's alot thinner than a bolster or chisel so can get them off easier.
Sds drill with a chisel bit or tile scraper
Just came here to say the same. SDS with a tile chisel will quickly lift the tiles.
Hammer and bolster
Yes, just try a hammer and bolster first. You may find the come off easily and so there is no need to resort to the SDS.
Your instinct to use the SDS drill with a chisel bit is pretty much spot on, I think. You can get special bits for removing tiles that have a bend in the shank, which will reduce the risk of going through the chipboard behind. ***EDIT:*** *This sort of thing: https://www.screwfix.com/p/armeg-sds-plus-shank-tile-removing-chisel-80mm-x-180mm/89391. Shop around though as you might be able to get cheaper elsewhere.*
Perfect I'll get that otherwise it will take me all year! Thanks.
Yeah, it's the sort of thing I'd look at and think it might be the best £30 I'd spent in a while.
https://preview.redd.it/x7z5wkn56r3d1.jpeg?width=529&format=pjpg&auto=webp&s=eb16c1f37962850efac3cf8a33b070743d6f5bc5
https://preview.redd.it/v37h352s8r3d1.jpeg?width=1179&format=pjpg&auto=webp&s=85dce6c632c0ad21548ddf89dbd7c1e3779483f8
That too ! Probably faster.
Bang bang
I bought a great thing recently in screwfix. Like a crow bar with a sharp chisel end on it that rips tiles right off. Was only a tenner aswell
https://www.screwfix.ie/p/roughneck-utility-bar-15/58202
A scouse bar?
My go to, ignorance
C4 or TnT 😁
SDS drill, or I've found if they aren't really stuck on then a old scraper can be really good as it's alot thinner than a bolster or chisel so can get them off easier.
Multi tool