Hello /u/Dyers3v3,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
I'd start by bringing the infill flow rate down to 90% to see if it at least lessens the scraping. Maybe dropping by 5% each time after that if the scraping is still there but less intense. There's a possibility it may make the infill look messier, but as long as it doesn't affect the outward appearance of the object it shouldn't really matter.
My nozzle keeps scraping on infill, I believe my z offset is good, I’m using an elegoo Neptune 3 pro my layer height is 0.2 and my nozzle temp is 205 C, and the bed is 60 C, I’m using a generic PLA from naga, the slicer is cura, my retraction distance is 1.0mm and retraction speed is 25mm/s and my print speed is 60mm/s. I've tried using z Hop but that hasn't seemed to work I had it on the default setting with no luck
Hello /u/Dyers3v3, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Try lowering your infill flow rate.
What would you recommend by? And or how would I know if I went to low?
I'd start by bringing the infill flow rate down to 90% to see if it at least lessens the scraping. Maybe dropping by 5% each time after that if the scraping is still there but less intense. There's a possibility it may make the infill look messier, but as long as it doesn't affect the outward appearance of the object it shouldn't really matter.
Ok I’ll try that
Turn off print infill before walls it’s a feature in cura that’s default set on the new update
My nozzle keeps scraping on infill, I believe my z offset is good, I’m using an elegoo Neptune 3 pro my layer height is 0.2 and my nozzle temp is 205 C, and the bed is 60 C, I’m using a generic PLA from naga, the slicer is cura, my retraction distance is 1.0mm and retraction speed is 25mm/s and my print speed is 60mm/s. I've tried using z Hop but that hasn't seemed to work I had it on the default setting with no luck