That doesn't make sense. If you enlarge it, it'll get stuck. But perhaps with enough exposure with hot water, it'll go down to baby size then back to normal.
Free energy! but when he plugged it in i could feel the energy radiating from it, and it made a loud noise and got mad at him. All of my electronics tried to go towards it. Maybe it doesn't like to be disturbed?
The ancient knew of this and made numerous treaties about the energy demons, they are called djins I believe, you should be able to find the facebook I reference by typing "leonardo da vinci free energy demons" on google
This is it. I was scanning to see if someone beat me to it. It's a thing that when you run power through it it heats a metal object you hold in the rings to red hot really fast, but that one is sketchy as they come..
It's an art piece called
"I hate soldering my connections even though they're made of beautiful woven copper that would be stronger and prettier with just a little solder oh God please"
no this is so real that looks about right
If you want the actual answer to this though, trust me i tried to solder it. I covered it in flux and tried to get the solder to follow it after heating the joint, and it wouldn't flow in by any means. So instead I opted for a connection by contact. The joint is just two pieces of stranded 2 gauge wire spliced together to complete the circuit, and then I wrapped smaller wire to increase the number of paths the current can follow which would decrease the extremely high current through all of the much smaller splice joints. It actually has done me way better than I was expecting, upon first fire up I was expecting it to just burst into melted copper, but so far, no signs of any damage whatsoever!
Yeah the trick is that you need liquid flux. That'll soak into the strands of the wire, just putting paste Flux on the surface doesn't do it. The paste won't soak in like liquid solder will. And of course there's not enough flux in rosin core solder core to do anything bigger than PCB work.
And it'll take a ton of heat to get that joint up to temp. You'll need 100 w soldering iron or a torch.
And trim off the last attempt and start with some fresh copper.
It's a microwave Oven transformer (MOT) wired in reverse to give a low voltage , high current output. The low volvage high current output is fed into the black coiled wire which is thick to handle the current and the heat. When you put something metallic inside the coil it will induce a current into the object causing it to heat up.. a lot. Hence the responses that it's an induction heater. Used for a lot of purposes that require heating up metal without the use of a flame. Not inherently dangerous other than the obvious burn hazard from the heated object as long as the supply voltage is kept below a dangerous voltage. Having said that, playing around with MOT's is not something folk should do without understanding the dangers.
sir irl this is just a big electromagnet, I wanted to see if I could achieve one tesla with a setup like this. I was wrong but it is nonetheless very powerful
Oh, your friend has a CENOBITE JERKATON. You insert your penis very slowly and try to touch the exposed naked wire with the tip. When this happens you will experience an ultimate pain and pleasure at the same time.
That's a free energy machine, it gathers the excess rf energy and just needs to be plugged in to backfeed your house, Best bet is to install it with thin wires somewhere at the back of your attic and forget about it so it just chills reducing your energy bill
Good call. It will of course work better if insulated with some shredded paper, then small sticks and then bigger ones to form a pyramid style structure, this is called the safety pyramid.
basically a home made version of this commercial device: [https://www.popularmechanics.com/home/tools/a44764536/induction-heat-bolt-remover/](https://www.popularmechanics.com/home/tools/a44764536/induction-heat-bolt-remover/)
i mean i think he constructed it in a safe manner... he wore his PPE (personal penis extension) while he was making it and took precautions, seems pretty safe to me
That is a transformer, likely out of a microwave, and the coil of wire is likely intended to be an induction heater... the transformer reduces the voltage but increases the amperage, allowing it to get red hot.
You see these things in industry for heating up items put inside the heater.. like for manuactuging of chain links, or heat treating bolts... backyard scientist on youtube melted a padlock with one.
only problem though is that you need a resistance wire on the output, and its goingi to get really really hot. The plastic coating on the coil here is likely going to melt instantly, and there is a good chance that coating is PVC... which means when that coating melts you will be making dioxin - one of the most toxic poison gases.
It's used to sterilize your prince albert
i was thinking maybe it's a machine to enlarge it 🤷🏼♂️ he does have a pretty big dick i was wondering how he got it
That doesn't make sense. If you enlarge it, it'll get stuck. But perhaps with enough exposure with hot water, it'll go down to baby size then back to normal.
\*Randy Marsh's balls intensify\* ![gif](giphy|3o6ZtrbzjGAAXyx2WQ|downsized)
:)) ty for the laugh ![gif](giphy|RRpaPGIlCRXuAZ6IZQ|downsized)
[удалено]
Very powerful 60Hz vibrator
Not really. Anyways... If you have a 3d printer then just use the Y axis to jerk yourself off XD
hmmm
Hahaha!
5 henry inductor, very powerful, with a rock crystal and a laser it is commonly used to harness unlimited free energy
Free energy! but when he plugged it in i could feel the energy radiating from it, and it made a loud noise and got mad at him. All of my electronics tried to go towards it. Maybe it doesn't like to be disturbed?
The ancient knew of this and made numerous treaties about the energy demons, they are called djins I believe, you should be able to find the facebook I reference by typing "leonardo da vinci free energy demons" on google
Excuse me, please consult the scripture created by the great AvE. They are actually angry pixies
No, not pixies. Machine elves, they make the magic smoke and keep it in the jade tablets, but they're allergic to spicy wires
I think instead of a rock crystal you are supposed to use a meth crystal
that's methed up.....Mike Tyson
Who is Henry
idk
Why won’t the government let us have them
Careful, Rob Dyrdek messed with something similar and went on a time traveling journey! s/
It's a jewelry cleaner. I usually stick my ring through the coil, but you can try with body piercings and other things too.
I keep losing fingers though... kinda weird
I can assure you that's normal. I was the guy that designed it :)
A very, very ineffective induction heater. Good for killing yourself with exposed mains, though.
Exactly
This is it. I was scanning to see if someone beat me to it. It's a thing that when you run power through it it heats a metal object you hold in the rings to red hot really fast, but that one is sketchy as they come..
Is there a way to make a simple induction heater that's inexpensive and more efficient?
Zvs driver
THIS
https://i.redd.it/a4t1argosy9d1.gif
https://i.redd.it/4h88d1kssy9d1.gif
It's an art piece called "I hate soldering my connections even though they're made of beautiful woven copper that would be stronger and prettier with just a little solder oh God please"
no this is so real that looks about right If you want the actual answer to this though, trust me i tried to solder it. I covered it in flux and tried to get the solder to follow it after heating the joint, and it wouldn't flow in by any means. So instead I opted for a connection by contact. The joint is just two pieces of stranded 2 gauge wire spliced together to complete the circuit, and then I wrapped smaller wire to increase the number of paths the current can follow which would decrease the extremely high current through all of the much smaller splice joints. It actually has done me way better than I was expecting, upon first fire up I was expecting it to just burst into melted copper, but so far, no signs of any damage whatsoever!
Yeah the trick is that you need liquid flux. That'll soak into the strands of the wire, just putting paste Flux on the surface doesn't do it. The paste won't soak in like liquid solder will. And of course there's not enough flux in rosin core solder core to do anything bigger than PCB work. And it'll take a ton of heat to get that joint up to temp. You'll need 100 w soldering iron or a torch. And trim off the last attempt and start with some fresh copper.
You need a butane torch my man. It's copper, you just didn't do it right.
Uncle Rico's time machine
Hold on. I forgot to put in the crystals.
lmaoo i could see that
It's a microwave Oven transformer (MOT) wired in reverse to give a low voltage , high current output. The low volvage high current output is fed into the black coiled wire which is thick to handle the current and the heat. When you put something metallic inside the coil it will induce a current into the object causing it to heat up.. a lot. Hence the responses that it's an induction heater. Used for a lot of purposes that require heating up metal without the use of a flame. Not inherently dangerous other than the obvious burn hazard from the heated object as long as the supply voltage is kept below a dangerous voltage. Having said that, playing around with MOT's is not something folk should do without understanding the dangers.
sir this is r/shittyaskelectronics
my bad, its a refrigerator :)
thanks!. Im going to go plug it in and stick a delicate, metal cylinder inside to cool it down
Beautiful.
no no let him speak im curious what really was
r/lostredditors
sir irl this is just a big electromagnet, I wanted to see if I could achieve one tesla with a setup like this. I was wrong but it is nonetheless very powerful
Have you tried with an iron core? Should make it a fair bit stronger.
I’m pretty sure this item is a house fire generator
No it’s definitely a smoke machine.
Any machine is a smoke machine if you use it wrong enough.
this is used to explode your dick once activated - good luck !
Extremely strong electromagnet coil or a metal object liquifier
You put a lightsaber crystal in there and it makes a lazer
I'd plug it in and see if my IQ score goes up.
only works when you lick the tip, just the tip, just for a minute.
Oh, your friend has a CENOBITE JERKATON. You insert your penis very slowly and try to touch the exposed naked wire with the tip. When this happens you will experience an ultimate pain and pleasure at the same time.
disconnect the two black wires plug the radio in and touch the black wires its just a radio to transmit your soul to the heaven
Willy warmer for cold winters
That is an antenna for a mind control device
I KNEW IT
Transgender machine
That's a free energy machine, it gathers the excess rf energy and just needs to be plugged in to backfeed your house, Best bet is to install it with thin wires somewhere at the back of your attic and forget about it so it just chills reducing your energy bill
Good call. It will of course work better if insulated with some shredded paper, then small sticks and then bigger ones to form a pyramid style structure, this is called the safety pyramid.
Lol the nail get hot very fast
I know, that’s a microwave transformer, and those make high voltage, and it has an antenna, therefore it must be a Bluetooth taser!
tool demagnetizer
i might have to ask him if i can borrow it in that case
Induction heater
Induction heatern't
honestly it'll heat itself before any actual metal
Is this to de-magnetize you penis when you are born with a pussy magnet?
I believe it may b an induction heater for smelting small metals. I could b wrong tho :/
Transformer from a microwave
Mains certified alligator clips
It is a induction heater , you put a 2 pieces of metal inside ring it one on the opposite side.
It’s a machine for licking to give spice
Looks like some sort of induction coil, but the coil is sleeved? Idk.
Phallus warmer for cold days
I would guess that it's some sort of induction heater for metal.
r/dontputyourdickinthat
well why not
It looks like an induction heating coil. They can be used to case harden some materials with high enough carbon content.
What the fuck is that
i don't know
r/electroboom
Looks like trying to make induction heater
your bro made a home made induction heating coil xD thats cool af
Maybe a diy induction heater?
Could that be to heat up and break off the top of a wine bottle.
RUN
Induction heater looks like
It's a bomb 👍🏼(joking)
Yeah. I wouldn't touch that or plug it in.
too late 🤪🤪🤪
stick your finger in the coil and turn it on, you'll find out
Microwave transformer with an electromagnet.
Cock warmer, obviously.
It's a heating coil. Not sure what it was used for
Looks like a makeshift magnetizer.
That’s in induction coil powered by microwave electronics
Voltage transformer Op has a friend that works in hvac or some sort of mechanical engineering job.
https://partsdr.com/part/w11545871-transformer?gad_source=1&gclid=CjwKCAjwhIS0BhBqEiwADAUhc0fGSro6JM5MtIgxHQrkVU2XY1C28eHNLHMaccSxiLKoPn-2NfJ15BoCmg8QAvD_BwE
induction heater
basically a home made version of this commercial device: [https://www.popularmechanics.com/home/tools/a44764536/induction-heat-bolt-remover/](https://www.popularmechanics.com/home/tools/a44764536/induction-heat-bolt-remover/)
Looks to be a SUPER SUPER sketchy induction heater of very small output.
Induction device possibly
A very dangerously built inductive heater.
i mean i think he constructed it in a safe manner... he wore his PPE (personal penis extension) while he was making it and took precautions, seems pretty safe to me
You didn't mention the penis extension. I take it all back.
Doctors hate him! See how he enlarged his shween with this one exposed AC circuit!
A demagnetizer or magnetizer for tools?
That is a transformer, likely out of a microwave, and the coil of wire is likely intended to be an induction heater... the transformer reduces the voltage but increases the amperage, allowing it to get red hot. You see these things in industry for heating up items put inside the heater.. like for manuactuging of chain links, or heat treating bolts... backyard scientist on youtube melted a padlock with one. only problem though is that you need a resistance wire on the output, and its goingi to get really really hot. The plastic coating on the coil here is likely going to melt instantly, and there is a good chance that coating is PVC... which means when that coating melts you will be making dioxin - one of the most toxic poison gases.
Yes, but your friend needs to insulate that connection or it will corrode when installed in the anal cavity
Worlds shittiest induction heater
Makeshift induction heater?
Looks like someone made an inductive heater coil from a microwave oven transformer.
Induction heater