Looks good, just make sure you remember building a water-cooled system is only 25% of what you need to do, you will need to remember to maintain it by completely cleaning the loop hopefully every 6 months at least.
It’s truly awesome. I just want to give a little suggestion that you should add a pc sensor panel to it. Which displays all temps,cpu usage Etc and all things in a 4-8 inch screen. Which you can add inside your case. Which will give extraordinary vibes and looks.
That looks great! How was it working with the hard tubing? I did mine out of soft tubing and it was nice to work with and it looks good but I would like to do a hard tubing one day.
First my first time, I messed up a couple times so
I had to redo if. After heating up your first 2-3 tubes, you get a lot better at it. For me, getting the bend to line up with the fitting was little hard but you get better at it
Temps aren’t too bad. Gpu idles around ~30C and Cpu idles around ~38C. My room temperature is around 70F. Under load, GPU is is around 56C and CPU is around 60s
Very cool, i see u painted your gpu block. I guess Its the alphacool core ? I want to do the exact same, but ended up buying the phanteks glacier g40.
Good job
Thanks! Was little difficult to fit everything in here but happy with how it turned out.
I do not. I’m planning on draining out the coolant upcoming day to add a drain port to make future draining easier. Also adding a quadro so removing the tubing and fan/radiator to get access to some pins will be easier.
It looks yellow and blue or cyan, definitely not looking white. I have rgb ram. I can turn it white, dim it, or turn it off. No reason to get rid of it. I do hit high temps on the ram, as much as 60C, I think non rgb could be better dissipating.
My bad.. They are yellow. It's easier to agree on something when you're looking at the same thing. They should be whiter if they are staying. I have had to colour match whites before. No big deal if they can be matched but computer rgb is not so cooperative.
Dude, I just bought new PC parts including RGB RAM and fans from different manufacturers, it's bad enough that the colors may not match, but dealing with different software too is gonna be a nightmare. I'm probably gonna make them one solid color and call it a day. Patterns? Forget it.
I’m thinking of getting a rgb hub so I don’t have to run more than 1 software. Look at “Open RGB” it’s a all in one program to control lighting patterns on all your rgb components. Unfortunately my graphics card is so new it’s not in their database.
Very clean bends! I have a O11D mini as well and love how it looks filled out with triple rads.
Thanks! I definitely wanted to make use with all the space and not have any open space.
Yo dawg. I heard you like space. So we put space in your space…
Nice and clean. Absolutely great job. Even more so considering it’s your first build.
Thanks!
Looks like a factory of some sort. Great job
Thanks!
Cooling with Mountain Dew nice
Super clean. Nice work and welcome to the club.
Thank you!
Ben 10 pc omintrix
Woop Woop looks good
Thank you 😃
Lovely build 👍🏽
Man, that is clean.
Looks killer! Good job
Looks good, just make sure you remember building a water-cooled system is only 25% of what you need to do, you will need to remember to maintain it by completely cleaning the loop hopefully every 6 months at least.
This is one thing I envy about the 4xxx series is the shorter pcb compared to my 3080
It’s truly awesome. I just want to give a little suggestion that you should add a pc sensor panel to it. Which displays all temps,cpu usage Etc and all things in a 4-8 inch screen. Which you can add inside your case. Which will give extraordinary vibes and looks.
Oh yeah. That green does it. Reminds me of Ben10.
It's BEAUTIFUL, great job
That’s really clean.
Fucking clean
That looks great! How was it working with the hard tubing? I did mine out of soft tubing and it was nice to work with and it looks good but I would like to do a hard tubing one day.
First my first time, I messed up a couple times so I had to redo if. After heating up your first 2-3 tubes, you get a lot better at it. For me, getting the bend to line up with the fitting was little hard but you get better at it
very nice loop design from gpu to radiator to cpu . have not seen that, or does the loop at the back go outside? not clearly seeing that
It goes from the pump to the gpu to radiator to Cpu. No tubing is going outside.
i c, as i thought. very nice
Great build. The custom white paint on Alphacool GPU WB looks perfect.
You killed it bro!
stunning
Fantastic job OP!
Love the frosty tubes and how you routed them
Bad ass
The green octopus! I like it
This is an awesome build, how are the temps?
Temps aren’t too bad. Gpu idles around ~30C and Cpu idles around ~38C. My room temperature is around 70F. Under load, GPU is is around 56C and CPU is around 60s
Congratulations! A beautiful computer!
Super Clean! I did my first (and only build, so far) in that case. Same rad arrangement.
This stopped my mindless scrolling. Looks really nice!
Very cool, i see u painted your gpu block. I guess Its the alphacool core ? I want to do the exact same, but ended up buying the phanteks glacier g40. Good job
It is the alpha core but didn’t want to paint it so I did a little bit of white vinyl wrapping.
Very clean very nice
Bastard keep it up
Nice work pal!!
Legit surprised if this is your first water build. The components and fitting look good.
Thanks!
That looks like acid, thats sick!
Like the green water for the car's radiator
That’s what my friends said! Antifreeze
Woohoo imagine when time to change coolant Woohoo
I’m about to drain the coolant in couple days to add a quadro
Best of luck to you :))
Can i use this to apply in geek squad?
You have my permission 😀
That’s your first water cooled build?! Damn that’s clean. Impressive!
Looks fantastic, nice job making a build in a Lian Li without a distro plate lol. I do have a question: Where's the drain port?
Thanks! Was little difficult to fit everything in here but happy with how it turned out. I do not. I’m planning on draining out the coolant upcoming day to add a drain port to make future draining easier. Also adding a quadro so removing the tubing and fan/radiator to get access to some pins will be easier.
The rgb ram needs to go but other than that clean build dude !
Set it to white or green and it's 👌🏾
I think it is white, just a different white than the rgb fans considering they're a different brand.
It looks yellow and blue or cyan, definitely not looking white. I have rgb ram. I can turn it white, dim it, or turn it off. No reason to get rid of it. I do hit high temps on the ram, as much as 60C, I think non rgb could be better dissipating.
I'm looking at the first picture, are we looking at the same thing?
My bad.. They are yellow. It's easier to agree on something when you're looking at the same thing. They should be whiter if they are staying. I have had to colour match whites before. No big deal if they can be matched but computer rgb is not so cooperative.
Dude, I just bought new PC parts including RGB RAM and fans from different manufacturers, it's bad enough that the colors may not match, but dealing with different software too is gonna be a nightmare. I'm probably gonna make them one solid color and call it a day. Patterns? Forget it.
I’m thinking of getting a rgb hub so I don’t have to run more than 1 software. Look at “Open RGB” it’s a all in one program to control lighting patterns on all your rgb components. Unfortunately my graphics card is so new it’s not in their database.