For sure, wish i had put more in. Right behind me out of frame is a wire mold strip I put in with like 8 outlets but they’re on the same 15a breaker. Hindsight is 2020 on that
It is. It’s a HF brand crane,hoist, and trolleys, but interestingly they didn’t sell a mount to connect the hoist to the trolleys. So I had to make brackets out of angle iron to mount it.
Whatever works, right. I don't have an electric hoist on mine. I got it 2nd hand from a buddy closing down his dad's machine shop. It's a 4t with a chain hoist on a trolly. It gets the job done. I may eventually get an electric hoist... maybe. I kinda like it the way it is now. I can wheel it out of the shop if I meed to and not have to worry about power.
👍x 6.
Plus another 👍x4 for the gun safe, but I’m going to have to subtract 2👍 for lack of (1) beer fridge and (2) no smoking hot, big tittle pinup.
So you get a grand total of 👍x8.
Good job optimizing your space! I wish my garage had taller ceilings so I could have things like a gantry crane and also to have more wall space for decor.
I think you mean after and before.
Was about to say, so you stripped your completed garage down to the studs?
Which slat walls are those? I like the color.
They are “proslat “ brand on Amazon. Reviews were mixed but they turned out fine for me. A lot of complaints were scratched up slats from shipping
Im curious too op!
I'm guessing Gladiator.
Missed opportunity with power outlets.
For sure, wish i had put more in. Right behind me out of frame is a wire mold strip I put in with like 8 outlets but they’re on the same 15a breaker. Hindsight is 2020 on that
Why did you tear it all out?? Looked great!
That a R series cafe racer I see ??
It’s a ‘62 R60/2!
That overhead hoist is a must. Good job.
i don’t use it every day but when I need it, i need it bad
Mine has come in handy quite a few times. Yours a 2T?
It is. It’s a HF brand crane,hoist, and trolleys, but interestingly they didn’t sell a mount to connect the hoist to the trolleys. So I had to make brackets out of angle iron to mount it.
Whatever works, right. I don't have an electric hoist on mine. I got it 2nd hand from a buddy closing down his dad's machine shop. It's a 4t with a chain hoist on a trolly. It gets the job done. I may eventually get an electric hoist... maybe. I kinda like it the way it is now. I can wheel it out of the shop if I meed to and not have to worry about power.
👍x 6. Plus another 👍x4 for the gun safe, but I’m going to have to subtract 2👍 for lack of (1) beer fridge and (2) no smoking hot, big tittle pinup. So you get a grand total of 👍x8.
Any info to share on the worktable? Looks unique.
it’s just an older sjobergs table that I got off marketplace
I would have put in about 20 more outlets
I love me a slat wall
What floor is that
It’s an epoxy coating. Once I dropped an engine on it and took a huge chunk out, i opted to cover it with a vinyl mat
What did you do on the flooring is that black epoxy and then a glued down rolled flooring?
It looks great. Just curious, did you place drywall behind the slatboard, or leave it out there?
I cut the drywall around the slatboard
Good job optimizing your space! I wish my garage had taller ceilings so I could have things like a gantry crane and also to have more wall space for decor.
Looks good for a first home project. How annoying is it to get to your electrical panel?
Lovely airhead.